Filter
Top Products
Deepstor
User Instructions
ISSUE 1 User Instruction
AUGUST 2003 Page 13
APPROACHING AND ENTERING THE RACK
The forklift truck should approach the rack squarely and not at an angle.
No attempt should be made to deposit/retrieve pallets or to enter a rack when the truck is NOT
correctly aligned. It is not acceptable to attempt to re-align a truck after entry into the rack.
UNACCEPTABLE PALLET HANDLING
It is not acceptable practice to:
• Nudge one pallet with another, in an attempt to move or re-align loads.
• Drag or slide pallets on or against the pallet rails or structure.
• Position or locate a pallet by nudging the one behind.
All of these are dangerous practices that impart additional loads in the rack structure, and could
lead to damage and a reduction in safety.
All are avoidable if the correct procedures are adopted.
NEVER WORK BENEATH STORED PALLETS
It is not safe to either work or drive a truck beneath a pallet that is being stored above.
Adhering to the correct loading/unloading sequences will prevent these unsafe situations occurring.