Filter
Top Products
Deepstor
User Instructions
ISSUE 1 User Instruction
AUGUST 2003 Page 24
DAMAGE INSPECTION – RAIL SPLICE & FIXING
Splice & Fixing
Missing Replace immediately
Damage to Fixing & Rail: Damage to M6 or M10 bolts and nuts by shearing, replace the
fixing immediately. When damage on fixing occurs, often, the fixing
holes on both pallet rail and splice are also damaged. Since the
splice is a crucial element in the rail, it is recommended that the
splice be replaced immediately. Note that the rail may also
need to be replaced. If the hole damage is not severe, the joining
rails may be swapped so that the undamaged holes may be used
at the splice.