Filter
Top Products
Deepstor
User Instructions
ISSUE 1 User Instruction
AUGUST 2003 Page 22
DAMAGE INSPECTION - LOAD ARM AND SAFETY LOCK
Safety Lock
Use Automatic Safety Lock is located on all Deepstor arms except the
front and rear uprights in a lane. Front and rear uprights are to be
bolted in position using 1 - M8x16 Nut and Bolt with 1 - M10 large
washer.
Missing: Replace immediately
Disengagement: Reposition immediately, when correctly positioned the pin should
pass through the lock hole in the arm and through the top of the
slot in the upright.
Damage upright slot: The safety lock pin may damage the top of an upright slot if the arm
has been raised. If damage has occurred, replace the Safety Lock
with 1-M8x16 (Grade 4.6) Nut and Bolt with large washer on the
inside of the upright.
Load Arm
Arm: Any damage on the arm or tearing and cracking of any hooks,
replace the arm immediately. If the slots are also damaged, the
entire level of arms and rail may have to be relocated.
Consult a Dexion representative for rack capacity prior to any
level adjustments.
A
RM WITH SAFETY LOCK
IN PLACE