Filter
Top Products
69
© 2006 Directed Electronics
To active Panic Mode:
➤
Press and hold the button on the transmitter for 6
seconds
➤
The Horn/Siren output and light flash will activate for
45 seconds
To de-active Panic Mode:
➤
Press and release the button on the transmitter
➤
Arm or Disarm the alarm system
Zone Bypass Feature
The Zone Bypass feature temporarily bypasses alarm inputs that
trigger excessively when the system is armed while monitoring the
other inputs for triggers. This keeps constant triggers due to envi-
ronmental reasons from annoying the neighbors.
Protected entry bypass:
If the door, hood, brake or ignition inputs become activated
through 3 consecutive 30 second full trigger durations, it will be
bypassed until it has become inactive for more than 5 seconds.
Sensor bypass:
If one of the sensor inputs is triggered 3 times within 1 hour, a
bypass timer will begin and that input will be bypassed for 1 hour.
If a trigger occurs on that input while the bypass timer is active,
the bypass timer will reset.
You can Disarm and then Rearm the alarm to defeat the sensor
bypass at any time.