Filter
Top Products
60
© 2006 Directed Electronics
OPERATING YOUR SYSTEMS FEATURES
The Remote Start, Alarm and Convenience features described in
this section follow the transmitter button assignments using the
Auto-Learn step when programming a transmitter.
Remote Start Features
Remote Start allows you to remotely start and run your vehicle for
a programmed period of time. This makes it possible to warm up
the engine, as well as adjust the interior temperature of the
vehicle with the climate control system. If interior heating or
cooling is desired, the climate controls must be preset, and the fan
blower must be set to the desired level prior to remote starting the
vehicle.
Remote Start operation is completely disabled by placing the
system into the Valet Mode. The Remote Start, Quick Stop, Daily
Start and Vacation Mode features will not operate when in the
Valet Mode. See the Alarm Features section for information on
entering Valet Mode.
Remote Start the vehicle:
➤ Press the button of the transmitter twice.
➤ The parking lights will flash once and the Horn/Siren
will chirp once to confirm that the vehicle will attempt
to start.
➤ The engine will start a few seconds after the parking
lights flash.
➤ Once started, the lights will flash and it will run for the
programmed period of time