Filter
Top Products
MAN 650067:F
3
MOUNTING SYSTEMS WITH ALUMINUM TRIM
There are two methods for mounting the display panel into your dash. The first method is
to cut an opening in the dash the size of the inside lip and “sandwich” the dash between the
bezel and the mounting plate. The second method is to cut an opening in the dash the size of
the outside of the bezel and mount the entire display assembly from the back using six #10 or
#8 mounting studs attached to the back of the dash.
Figure 1 shows method #1 with a steel or thin fiberglass dash. Figure 2 shows method
#1 with a thick fiberglass or wood dash. Figure 3 shows method #2.
Tooth washer
foam tape
Pan head screws
Lens
Your dash
material.
Bezel
Mounting plate
with studs
Display Panel
Nut
Figure 1. Mounting method 1 with thin dash.
Bezel
Lens
Pan head screws
Display Panel
Your dash
material.
Tooth washer
Mounting plate
with studs
Nut
Figure 2. Mounting Method 1 with thick dash.