Filter
Top Products
25
OPTIONS PROGRAMMING Cont.
24. Option Reset: (RESTORE TO DEFAULT FOR EZ-45DP II ONLY) on pages 20-21
This option allows you to restore all programmable options to factory default values. Go to the option 24 and press the
Unlock Button #2 on the remote. The lights flash 2 times and all values will be reset to factory original settings.
OPTIONS PROGRAMMING FOR EZ-55 AND EZ-95 ONLY
FOR EZ-55 AND EZ-95 ONLY
24. Aux #3:
This option controls the function of the Violet wire for a negative output for a Momentary, Pulse, Timed or Latched
output, depending on option used. Option #25 controls the length of time output.
25. Aux #3 Time control: (1 sec. to 255 sec.) Default = 12 seconds
This option determines to length of time that is outputted from Aux #3 (Violet wire). Pressing the Lock or Unlock buttons
on the remote raises or lowers the time by one second.
26. Aux #4:
This option controls the function of the Violet/White wire for a negative output for a Momentary, Pulse, Timed or
Latched output, depending on option used. Option #27 controls the length of time output.
27. Aux #4 Time control: (1 sec. to 255 sec.) Default = 12 seconds
This option determines to length of time that is outputted from Aux #4 (Violet/White wire). Pressing the Lock or Unlock
buttons on the remote raises or lowers the time by one second.
28. Option Reset: (RESTORE TO DEFAULT FOR EZ-55 AND EZ-95) on pages 20-21
This option allows you to restore all programmable options to factory default values. Go to the option 28 and press the
Unlock Button #2 on the remote. The lights flash 2 times and all values will be reset to factory original settings. Default
values are marked with asterisks in the chart on pages 20-21.