Clifford 770 Automobile Alarm User Manual


 
40
Omnisensor: A dual-zone learning impact sensor.
PlainView 2 Valet Button
: A small two-button switch mounted some-
where inside the vehicle. It is used to override the alarm when a remote
is lost or damaged, or to enter or exit Valet mode.
Siren
: Noise generating device usually installed in the engine compart-
ment of the vehicle. It is responsible for generating the "chirps" you
hear, as well as the six tones you hear while the alarm is triggered.
Remote
: Hand-held transmitter which operates the various functions of
your system.
Trigger or Triggered Sequence: This is what happens when the alarm
goes off or trips. The triggered response of your system consists of the
siren sounding and parking light flashing for the programmed duration.
Warning Zone Response:
Lighter impacts or movement close to the vehi-
cle will generate the Warning Zone response. It consists of a warning
siren blast or beep.
Zone
: A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular zone. Two
or more inputs often share the same zone.