Filter
Top Products
22
cliffnet wizard installation software programming
Cliffnet Wizard provides access to all available system features and
some that are not available when manually programming with the
Valet
®
button. Cliffnet Wizard is compatible with Microsoft Windows
2000/ME/XP/NT so most programming operations can be accomplished
by pointing and clicking with a mouse. This eliminates the need for pro-
gramming grids and lengthy programming sequences. For a complete
guide to system programming using the Cliffnet Wizard refer to the
Cliffnet Wizard help menu.
manual programming instructions
Be sure to document changes by taking note of all feature changes
made in programming mode.
To enter the User Selectable Features programming:
1. Ignition on - Turn the ignition to the run position or start the engine.
2. Enter PIN - Enter the factory preset PIN code 2 by pressing
on the PlainView 2 Valet
®
button twice, then once.
3. Hold/Chirp/Release - After entering the PIN code, press and
hold until a chirp is heard and the LED turns on, then
release the button. You have now entered the feature selec-
tion position of the User Selectable Features grid.
4. Column select - Press the same number of times as the
desired column. After a pause the siren will chirp the same
number of times as the selected column for confirmation.
nnoottee::
If the factory preset PIN has been changed, the new PIN must
be entered.