Clifford 770 Automobile Alarm User Manual


 
39
© 2006 directed electronics
z
Primary zone can now be re-adjusted as described in
step 4.
z
Or press again to exit programming mode.
z
The siren will chirp 3 times when sensor adjustment
mode has been exited.
glossary of terms
Control Unit:
The "brain" of your system. Usually hidden underneath
the dash area of the vehicle. It houses the microprocessor which mon-
itors your vehicle and controls all of the system's functions.
Input
: A physical connection to the system. An input can be provided
by a sensor, pinswitch or through an existing system in the vehicle, such
as ignition or courtesy lights.
LED
: Blue light mounted somewhere in the vehicle. It is used to indi-
cate the status of your system. It is also used to report triggers and
faults in the system or sensors.
UltraSecure Immobilizer
: A feature on the module which prevents the
vehicle’s engine from operating whenever the system is armed. The
vehicle is never prevented from running when the system is disarmed,
in Valet mode, or loss of power.
nnoottee::
You must wait 15-seconds for the Omnisensor to become active
after arming.