Filter
Top Products
23
© 2006 directed electronics
5. Feature select - Press the same number of times as the
desired feature. The siren will chirp with each press. The fea-
ture can now be changed using the remote control.
6. Feature change - Press on the remote. If the system
chirps once, the feature has just turned off; if the system
chips twice, the feature has just turned on. If the feature has
more than two settings, continue pressing on the
remote to toggle through the settings.
You can advance to any feature in the same column by
pressing within 60 seconds; to program a feature in a
different column begin at step 4 within 60 seconds.
7. Exit programming - To exit programming mode turn the igni-
tion off or wait 60 seconds without pressing the PlainView 2
Valet
®
button. The siren will chirp three times to indicate pro-
gramming mode has been exited.
nnoottee::
Refer to the
Feature Descriptions
sections of this guide for impor-
tant notes and descriptions of the system features and programming.