Clifford 770 Automobile Alarm User Manual


 
28
reset to default settings
All system settings (except PIN and remote programming) in the User
Programming grid will be reset to their default factory setting as indi-
cated in bold lettering.
z
Press the arm/disarm button of the TX; the siren will chirp
twice as confirmation.
panic off/on
z
Off: The panic feature is not available.
z
On: The panic feature is available.
auto start setting - off/battery only/temp only/battery and temp
z
Off: The vehicle will not autostart.
z
Battery: The vehicle will only autostart when the car battery
gets low.
z
Temperature: The vehicle will only autostart at a preset low
temperature.
z
Battery and temperature: The vehicle will autostart with a
low car battery or low temperature.
blackjax off/on
z
Off: The system cannot enter BlackJax mode.
z
On: The system will enter BlackJax mode when triggered.
nnoottee::
Temperature and battery calibration and settings can be made
only with the Cliffnet Wizard.
nnoottee::
This feature is only available with the IntelliStart option.