Filter
Top Products
Black plate (110,1)
Model "Z51-D" EDITED: 2010/ 7/ 23
SIC4401
The heated steering wheel system is designed
to operate only when the surface temperature of
the steering wheel is below 688F (208C).
Push the heated steering wheel switch to warm
the steering wheel after the engine starts. The
indicator light
*
1
on the switch will illuminate.
If the surface temperature of the steering wheel
is below 688F (20 8C), the system will heat the
steering wheel and cycle off and on to maintain a
temperature above 688F (208C). The indicator
light will remain on as long as the system is on.
Push the switch again to turn the heated
steering wheel system off manually. The indica-
tor light will turn off.
NOTE:
If the surface temperature of the steering
wheel is above 688F (208C) when the switch
is turned on, the system will not heat the
steering wheel. This is not a malfunction.
WARNING
Do not use or allow occupants to use
the seat heater if you or the occupants
cannot monitor elevated seat tempera-
tures or have an inability to feel pain in
body parts that contact the seat. Use of
the seat heater by such people could
result in serious injury.
CAUTION
. The battery could run down if the
seat heater is operated while the
engine is not running.
. Do not use the seat heater for
extended periods or when no one
is using the seat.
. Do not put anything on the seat
which ins ula te s heat , su ch as a
blanket, cushion, seat cover, etc.
Otherwis e, the seat may become
overheated.
. Do not place anything hard or heavy
on the seat or pierce it with a pin or
similar object. This may result in
damage to the heater.
HEATED STEERING WHEEL (if so
equipped)
HEATED SEATS (if so equipped)
2-38 Instruments and controls