Filter
Top Products
6
50061011 Chevy Impala SS
A Division of KW automotive North America, Inc
An additional inside support handle must be installed to solve the issue of possible difficulty of griping the
door, when raising and lowering your door from your seated position.
If there are white lights on your door, these must be made ineffective, e. g. taking of the bulb and bulb holder
according to fig. 5.22 ECE-law no. 48.
After mounting the LSD hinge system you must reinstall your OEM inner fender covers to keep your LSD
hinges free from debris and corrosion.
You must have an authorized workshop check that the central locking system (if equipped) is working prop-
erly.
You must have an authorized workshop check the functionality of all systems, switches and components
(including: loudspeakers, alarm system, CAN data bus systems, window lifts, crash-sensor, memory seat ad-
justment, mirror adjustment and heating, etc. if equipped).
While adjusting the door please take special care to position it in the matching door frame as not to cause any
damages to paint etc.
In case any chassis modifications were performed, please use the supplied chassis glue (if required for spe-
cific application) to seal any openings on the A-pillar or doors (make sure panels are free from grease and
dust before applying chassis glue for a superior water tight seal).
NOTE: please be aware your car might have different factory installed equipment from our tested R&D vehi-
cle, in this case please contact your LSD dealer to order higher or lower power gas damper units (an addi-
tional cost may apply).
Please note that the power of the gas dampers may fluctuate due to ambient temperature variations, the
opening and closing forces may also differ according to damper manufacturers specifications (warranty
claims will only be honored if there’s an internal defect or an error in production).
All LSD hinges come with a protective oil coating, please remove coating and then apply the included PSK
spray for superior sealing of the finish.
If any body work is performed, use Corrosion prevention methods according to the vehicle manufactures
specifications.
Updated installation instructions can be found on www.lsd-doors.com (guide notes subject to change without
notice).
A second person makes the work much easier. Please instruct the second person before start work-
ing.
It is recommended to keep your LSD door hinges maintained on a regular basis for a lifetime of trouble
free operation.
General installation instructions:
! Attention notice: