Filter
Top Products
23
50061011 Chevy Impala SS
A Division of KW automotive North America, Inc
STEP 8 MOUNTING THE GAS DAMPER (after correct gap distance has been established)
8a. Hang (mount) the gas damper on the mount point of the swing arm (Photo 22). Secure
it with the kit supplied security ring, by using needle-nose pliers.
8b. NOTE: Use care when installing the security ring.
8c. The rubber o-ring, located on top of the gas damper has to be moved (Photo 23) be-
tween the Ground plate and the top of the ball joint of the gas damper (Photo 24).
PHOTO 22 PHOTO 23
PHOTO 24
8d. Carefully pivot the door up and hang in the gas damper at the fitting point of the Ground
plate. Secure it with the kit supplied security ring (Photo 25)
DANGER: The gas damper is under extreme pressure! Please make sure the security
rings are installed correctly and are snapped in their respective guides.
PHOTO 25