Filter
Top Products
21
50061011 Chevy Impala SS
A Division of KW automotive North America, Inc
STEP 7 MOUNTING THE DOOR TO THE A-FRAME IMPORTANT NOTE: THIS STEP SHOULD BE
DONE WITHOUT THE GAS SPRING INSTALLED
7a. Place the door back on the vehicle and close the door completely.
7a. Install the MAGICSTIK into position (Photo 16) Initially, this is done for mounting pur-
poses only, using the MAGICSTIK as a guide.
7b. Lifting the door into position, guide the MAGICSTIK into its mating block (Photo 17),
manually holding the door there, as close to the closed position as possible.
7c. Attach the swing arm to the ground plate with the four (4) kit supplied bolts and adjust
the door via moving the swing arm adjustable plate connection mount with the horizon-
tal door gap adjuster in the right or left direction until the gap measurement is like the
original (Photo 18).
INITIAL ADJUSTMENT OF THE DOOR
7d. Adjustment height of the door is by moving the Ground plate (F) vertically. Make
sure the mounting hardware is loosened to be able to do this.
7e. Adjustment depth of the door is by moving the door horizontal. Make sure the mount-
ing hardware is loosened to be able to do this.
PHOTO 16
PHOTO 17
PHOTO 18
IMPORTANT NOTE:
Torque mounting bolt to 10ft-
lb.