Filter
Top Products
12
50061011 Chevy Impala SS
A Division of KW automotive North America, Inc
STEP 1 INNER FENDER MODIFICATION –cont’d-
For this particular application, once the outer fender has been removed, the inner fender needs
to be modified, to accommodate the new LSD hinges. The following pictures show the areas
(outlined in white) that will need to be removed.
1a. Using a cutting tool, a manual or pneumatic saw, begin cutting along the white line to
wards the top of the inner fender (Photo 1). Cut-out completely and remove (Photo 2).
1b. After the first cut has been done, this is what it should look like (Photo 3).
PHOTO 1
PHOTO 2
PHOTO 3
80mm
65mm