Filter
Top Products
Three Passenger Seat Shown
The passenger side pin has a black cap with a
white “R” marked on it.
On a four passenger seat, each half of the seat
has a set of pins. The driver side has a set marked
“L”, and the passenger side has a set marked “R”.
If the vehicle has floor mats, the pins will be
located under a flap that has been cut into the mat.
3. Pull the pin handle up to disengage the pin from
the retaining clip, then pull the pin out.
4. Repeat this procedure for the other pins.
5. Pull the seat rearward about 2 inches (5 cm) and
then lift the seat from the floor rails.
6. Remove the seat from the vehicle.
7. For the first row rear
seat, stow the safety
belt latch by attaching
the clip on the safety
belt latch to the trim
just inside the
side door.
For the remaining rear seats, stow the safety belt
latch plate on the clip at the window trim.
2-7