Filter
Top Products
Black plate (7,1)
Cadillac ATS Owner Manual - 2013 - crc - 6/5/12
Seats and Restraints 3-7
Remove the obstruction; then press
and hold the appropriate manual
control for the memory item that is
not recalling for two seconds. Try
recalling the memory position again
by pressing the appropriate memory
button. If the memory position is still
not recalling, see your dealer for
service.
Storing RKE Memory Positions
Every time the ignition is placed in
OFF, the vehicle will automatically
store the driver seat and outside
mirror positions to the RKE
transmitter used to start the vehicle.
These positions are called RKE
Memory positions and may be
different than the previously
mentioned Button Memory positions
saved to the “1,” “2,” and
B
buttons.
Recalling RKE Memory Positions
(Auto Memory Recall)
The Auto (Automatic) Memory
Recall feature automatically recalls
the previously stored RKE Memory
positions for the current driver when
entering the vehicle.
Depending upon the Auto Memory
Recall feature enabled in the vehicle
personalization menu, RKE Memory
positions are recalled in the
following ways:
To activate the recall when On -
Driver Door Open is selected in the
vehicle personalization menu:
.
On vehicles with RKE, press K
on the RKE transmitter and open
the door.
.
On vehicles with keyless access,
press the lock/unlock button on
the outside driver door handle
and open the driver door. The
RKE transmitter must be present
for the recall to activate.
.
If the driver door is already
open, press
K on the RKE
transmitter to activate the recall.
To activate the recall when On - At
Ignition On is selected in the vehicle
personalization menu:
.
Place the ignition in ON/RUN/
START.
See Vehicle Personalization on
page 5‑41.
To stop recall movement, press one
of the memory, power mirror,
or power seat controls; shift an
automatic transmission out of
P (Park); or release the parking
brake on vehicles with a manual
transmission when the engine is
running. If On - At Ignition On is
selected in the vehicle
personalization menu, placing the
ignition in OFF also stops the recall.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.
Remove the obstruction; then press
and hold the appropriate manual