Filter
Top Products
Black plate (6,1)
Cadillac ATS Owner Manual - 2013 - crc - 6/5/12
3-6 Seats and Restraints
Memory Seats
If available, the "1," "2," SET, and
B (Exit) buttons on the driver door
are used to manually save and
recall memory settings for the driver
seat and outside mirrors. These
manually stored positions are
referred to as Button Memory
positions.
The vehicle will also automatically
save driver seat and outside mirror
positions to the current driver
Remote Keyless Entry (RKE)
transmitter when the ignition is
placed in OFF. These automatically
stored positions are referred to as
RKE Memory positions. See
Remote Keyless Entry (RKE)
System Operation on page 2‑3.
Storing Button Memory Positions
To save positions into Button
Memory for the “1” and “2” driving
positions:
1. Adjust the driver seat and
outside mirrors to the desired
driving positions.
2. Press and hold SET and “1” at
the same time until a beep
sounds.
3. Repeat Steps 1 and 2 for a
second driver using “2.”
To save positions into Button
Memory for the
B (Exit) and Easy
Exit features:
1. Adjust the driver seat and
outside mirrors to the desired
positions for getting out of the
vehicle.
2. Press and hold SET and
B at
the same time until a beep
sounds.
Recalling Button Memory
Positions
Press and hold "1," "2," or
B to
recall the Button Memory positions.
Releasing "1,” "2," or
B before the
stored positions are reached stops
the recall.
Briefly press and release “1,” “2,” or
B to recall the Button Memory
positions. The ignition must be in
ON/RUN/START, and the
transmission must be in P (Park) for
an automatic transmission or the
parking brake must be set for a
manual transmission. Placing the
ignition in OFF, moving the shift
lever out of P (Park), or releasing
the parking brake before the stored
positions are reached stops the
recall.
If something has blocked the driver
seat while recalling a memory
position, the recall may stop.