Cadillac 2006 DTS Automobile User Manual


 
3. Pull the clip up from the blade connecting point,
and pull the blade assembly down toward the
windshield to remove it from the wiper arm.
4. Install the new wiper blade onto the wiper arm and
firmly press down on the clip to snap it into place.
To remove and replace the wiper blade element do the
following:
1. The wiper blade element has two notches at
one end which are engaged by the bottom claw set
of the wiper blade. At the notched end of the
wiper blade, pull the wiper blade element from the
wiper blade assembly.
2. To replace the element, start at the heel end of the
wiper blade, which is the end nearest to the base of
the wiper arm, and slide the wiper blade element,
notched end last, into the wiper blade claw sets.
3. To engage the last claw into the notched end of the
wiper blade element, squeeze the wiper blade
element at the notched area, and push the wiper
blade element so the claw fits into the notch.
4. Be sure the two wiper blade element notches are
engaged by the last claw set, and that all the other
claws are properly engaged in the slots of the
wiper blade element on both sides.
5-48