Filter
Top Products
Increasing Speed While Using Cruise
Control
There are two ways to go to a higher speed:
• Use the accelerator pedal to get to the higher
speed. Press the SET button, then release the
button and the accelerator pedal. You will
now cruise at the higher speed.
• Press the RES button. Hold it there until you get up
to the speed that you want, and then release the
button. To increase your speed in very small
amounts, briefly press the RES button and then
release it. Each time you do this, your vehicle will
speed up approximately 1 mph (1.6 km/h).
The accelerate feature will only work after you have set
the cruise control speed by pressing the SET button.
Reducing Speed While Using Cruise
Control
There are two ways to reduce your speed while using
cruise control:
• Press the SET button until you reach the lower
speed you want, then release it.
• To slow down in very small amounts, push the SET
button briefly. Each time you do this, the vehicle will
slow down approximately 1 mph (1.6 km/h).
Passing Another Vehicle While Using
Cruise Control
Use the accelerator pedal to increase your speed.
When you take your foot off the pedal, your vehicle will
slow down to the cruise control speed you set earlier.
3-18