Cadillac 2006 DTS Automobile User Manual


 
] (On): This position activates the system.
+ Resume (Resume/Accelerate): Push this button to
make the vehicle resume to a previously set speed
or to increase the set speed when Adaptive Cruise
Control is already active.
Set: Press this button to set the speed or to
decrease the set speed when Adaptive Cruise
Control is already active.
[ (Cancel): Press this button to cancel adaptive
cruise control.
+ (Increase Following Distance): Press this button
to increase the distance between your vehicle and
other vehicles.
(Decrease Following Distance): Press this button to
decrease the distance between your vehicle and
other vehicles.
Adaptive cruise control will not work if the master
cylinder brake fluid level is low.
Engaging Adaptive Cruise Control With
the Set Button
{CAUTION:
If you leave your Adaptive Cruise Control
switch on when you are not using cruise, you
might hit a button and go into cruise when you
do not want to. You could be startled and even
lose control. Keep the Adaptive Cruise Control
switch off until you want to use cruise control.
The set speed is selected by the driver. This is the
speed you will travel if there is no vehicle detected in
your path.
3-22