Filter
Top Products
7
BASIC OPERATION
While looking through the 5x eyepiece, press and release the POWER button once to activate the in-
view Liquid Crystal Display (LCD). Place the aiming circle (located in the center of the image) on a target
at least five yards away. Press the POWER button again and hold it down until the range reading is
displayed near the bottom of the LCD. Crosshairs surrounding the aiming circle indicate that the laser is
being transmitted. Once a range has been acquired, you can release the POWER button. The crosshairs
surrounding the aiming circle will disappear once the POWER button has been released (the laser is no
longer being transmitted), but the LCD will remain active and display the last distance measurement for
the next 30 seconds. You can depress the POWER button again at any time to distance to a new target.
The maximum time the laser is transmitted (fired) is 10 seconds. To re-fire, press the button down again.
USING THE LASER RANGEFINDER
Your Bushnell® HYBRID™ includes an advanced premium laser rangefinder using Digital Technology,
allowing range readings from 10-1000 yards / 10-914 meters. Measuring a mere 2.1 x 2.6 x 4.3
inches, this 8.5 ounce unit delivers superb and accurate range performance to +/- one yard. The HYBRID
features PinSeeker® Technology, 5x magnification, and multi-coated optics for excellent light transmission,
clarity, and brightness.
HOW OUR DIGITAL TECHNOLOGY WORKS
The Bushnell HYBRID’s laser rangefinder employs an eye safe FDA Class 1 and CE Class 3A laser
in its operation. The HYBRID’s Advanced Digital microprocessor and ASIC chip (Application-Specific
Integrated Circuit) results in instantaneous and accurate readings every time. Sophisticated digital
technology instantaneously calculates distances by measuring the time it takes for each pulse to travel
from the rangefinder to the target, and back.