Bushnell 201951 GPS Receiver User Manual


 
12
STARTING UP/POWER BUTTON OPERATION
Power On
•Pressandholdthepowerbuttonuntil“BushnellHybrid”appears(about2seconds).
Power Off
•Pressandholdthepowerbuttonuntilthescreengoesblank*.
Backlight On/Off
•Fromanyscreen,pressthepowerbuttontoturnthebacklighton.
•Presspowerbuttonagaintoturnthebacklightoff.
*NOTE: the unit will automatically power off after 45 minutes if no buttons are pressed.
To override this, enter the OPTIONS menu, select SETTINGS and change the AUTO OFF setting to “OFF”.
First, be sure the battery has a full charge. If you are using it for the first time, it should be charged for 6
hours minimum (refer to “Battery Charging” on pg. 6 for details). Next, make sure you are outdoors, in
a location with a clear view of the sky overhead, to ensure good reception of GPS satellite signals. Now,
you’re ready to power up and begin to use your Hybrid.
Hold down the Power button until you see the startup screen, and then release it.
You will see the Main Menu screen, which has only two items: PLAY GOLF
and OPTIONS (Fig. 1).
Using the Hybrid menu system is simple:
1. Select (highlight) a menu item using the UP/DOWN buttons.
2. Press the OK/SHOT button to enter it.
3. Press the ESC/MENU button to return to the previous menu level.
Fig. 1