Bushnell 201951 GPS Receiver User Manual


 
13
SETTING UP YOUR iGOLF.com ACCOUNT and REGISTERING YOUR HYBRID
Within 45 days of purchase, go to iGolf.com to register your Hybrid, which will update the preloaded
GPS course data and load any new courses that have been recently added to the iGolf database.
Registration is free and will only take a few minutes.
If a unit that has not been registered is powered on 45 days or more after the first GPS fix, the GPS section
will not function (the laser rangefinder is not affected) and display a prompt to register online (which will
restore it to normal operation).
1. Using the provided cable, connect one end to the mini USB port on the front of your Hybrid and
attach the other end to a USB port on your computer. The display will indicate “USB Mode” and your
computer will recognize it as a standard USB mass storage device (no driver is required).
2. Go to http://www.igolf.com, select ‘Join Now’, enter the requested information and select the ‘Join
Now’ button to continue. Create your iGolf.com profile and select the ‘Save’ button. While on the My
Profile page, select the ‘Sync Device’ button to register your Hybrid.
PLAY GOLF MODE
With PLAY GOLF highlighted, press OK. The display will indicate that the
unit is SEARCHING FOR LOCAL COURSES. If it does not, and you see this
message: “Not enough satellites for local search. Press OK to start manual
search.” press OK/SHOT and follow the MANUAL SEARCH procedure
describedinthenextparagraph*.Whenthesearchiscomplete,alist
of golf courses in order of their distance from your current location is
displayed (Fig. 2). Select the course you want from the list and press
OK/SHOT.
Fig. 2