Bushnell 201951 GPS Receiver User Manual


 
23
LASER TROUBLE SHOOTING
If unit does not turn on - LCD does not illuminate:
•DepressPOWERbutton.
•Checkbatteryconditionandifnecessary,chargebattery.
If unit powers down (display goes blank when attempting to power the laser):
•Thebatterychargeistoolow.ChargethebatteryusingtheUSBcableandACadapterforatleast6hours.
If target range cannot be obtained:
•MakesureLCDisilluminated.
•Makesurethatthepowerbuttonisbeingdepressed.
•Makesurethatnothing,suchasyourhandornger,isblockingthetwofrontlensesthattransmitand
receive the laser pulses.
•Makesureunitisheldsteadywhiledepressingpowerbutton.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim at the
new target using the LCD’s circular reticle, depress the power button and hold until the new range reading is
displayed.
GPS TROUBLE SHOOTING
Problem: The backlight does not work.
Turn the Hybrid off for ten (10) seconds and try again. Re-test in a low-light environment.
From the Main Menu, press and release the power button.
Problem: The Hybrid will not turn off.
Press and hold power button for at least ten (10) seconds.