Buhler HQ6095 Automobile Accessories User Manual


 
bühler
1500 Bale Carrier
3
GENERAL SPECIFICATIONS:
Dimensions:
- Length: 44’ (13.4 m)
- Deck Length: 37’ (11.3 m)
- Width: 8’6” (2.6 m)
- Weight (empty): 5495 LB (2498 kg)
- Drawbar Vertical Load (empty): 1365 LBF (6071 N)
- GVW: 18720 LB (8491 kg)
Capacity:
- Total bale payload: 13225 LB (6000 kg)
- Bales 6’ (1.8 m) diameter maximum to 4’ (1.2 m) diameter minimum
- Hay crop, small grains, and flax straw
- Eight 4’ (1.2 m) wide bales
- Seven 5’ (1.52 m) wide bales
Tires:
- 4-12.5L x 15 FI - 12 ply, Load Range F, Farm Hwy Service tire
- Six bolt heavy-duty hubs with twine guards
- Walking beam axle design
Control Handle:
- Power: 12v
- Fuse: 15 amp (surge protection provided on machine)
Hydraulics:
- Two remote tractor hydraulics circuits required for operation
- Closed-center hydraulic standard.
- In-field configuration is required for open-center or load-sensing tractors
- One Lift cylinder with restrictor
- One Tilt cylinder with restrictor
- Two 22.2 cu. inch (363.79 cu cm) hydraulic motors
- See Appendix B for details on hydraulic components
Tractor:
- Size: 60 hp (45kW) recommended
- Weight: As per ASAE specification ASAE S365.4 the tractor must weight 12480 LB
(5660 kg) to adequately handle a GVW of 18720 LB (8491 kg)
- Maximum loaded towing speed 20 mph (32 km/h)