Filter
Top Products
bühler
1500 Bale Carrier
19
4. Chain
Check for proper chain tension and sprocket
alignment after first use and every 50 hours
thereafter.
Turn the front sprocket-adjusting bolt
clockwise until there is approximately 6” (15
cm) of upward slack in the chain at the center
of the track. Clockwise increases tension and
counter clockwise reduces tension.
Proper chain tension may be verified by
raising the chain by hand.
See lubrication section for further
maintenance instructions.
FRONT ADJUSTING
BOLT
5. Wheels / Tires
Inspect hub bolts after first use and 50 hrs thereafter. Hub bolts must be torqued to
125 ft-lb (170 Nm).
Thread-locking compound such as Locktite 242 is recommended for the hub bolts.
Ensure that dust caps are firmly in place.
Check tires pressure regularly: 90 psi (620 kpa).
The wheel bearings should be inspected and re-packed annually with SAE multi
purpose type grease. Grease every 500hrs if hub is supplied with grease fitting.
Air valve should face away from the hub.