Filter
Top Products
bühler
1500 Bale Carrier
23
CAUTION
Make sure area is clear of obstructions, well lit, and has sufficient
room for safe assembly. Do not work underneath raised assembly.
CAUTION
Ensure the carrier’s tires and hitch are securely blocked.
Otherwise, verify the carrier is properly coupled to the drawbar on a tractor with a minimum
of 12480 LB (5660 kg).
Carrier Bundled Assembly
1. Tandem Axle Assembly Installation
Refer to Carrier Bundled Assembly drawing:
Raise the main assembly to a maximum of three feet to insert the tandem axle
assembly (A2400-14) on both sides. Make sure that the assembly is securely held in
place. Support assembly with the appropriate rated stands for the load.
Insert the tandem axle assembly on to the axle Beam (C2407-00).
Insert the tandem axle locator (C8005-00) between the tandem axle assembly
bushings, continue to insert the axle assembly.
Insert nut (984077) and set screw (813547) into the locator.
Install tires
Torque all fasteners to the torque specifications listed in the maintenance section of
this manual.
Lubricate axle and hubs; refer to lubrication section for details.
Recheck all bolt torques after first use.
2. Brace Weldment Installation
Refer to Carrier Bundled Assembly drawing:
The carrier has six braces that need to be installed on the undercarriage of the main
assembly.
All fasteners require a flat washer and a lock nut.
Loosely assemble and fasten all braces.
Torque all hardware to the required torque specifications listed on the maintenance
section of this manual.