Filter
Top Products
bühler
1500 Bale Carrier
12
3. Carrier Control Operation
To start 1500 Bale Carrier operation, engage the remote hydraulic valve in the
extension position. Lock valve in detent. Valve to remain constantly on during
operation.
The control handle is fitted with one rocker switch and two momentary contact
rocker switches. They function as follows:
o PUSHER SPEED: Select (HIGH) to operate
pusher motors in series at high speed or
(LOW) to operate in parallel at low speed. Torque
is increased at low speed and pushes bales with
more force.
o PUSHER: Depress and hold PUSHER FWD to
move forward. Depress and hold PUSHER BACK
to move pusher back.
o LIFT ARM: Depress and hold LIFT ARM UP to
raise lift-arm. Depress and hold LIFT ARM DN to
lower lift-arm.
To operate raise / lower tilt function engage the remote hydraulic valve in the
extension position to raise the tilt deck and engage the retract position to lower
the deck.
4. Loading Bales
WARNING
Make sure area is clear before lowering bale lift-arm. Failure to
do so could result in injury or death.
Align the tractor and 1500 Bale Carrier as indicated in the pictoral for pick up
method used. Slowly approach the bale at 5 mph (8 km/h) while loading. When
bale is properly captured, begin to lift bale.
The 1500 Bale Carrier is designed to load bales with one of three options. Refer
to the appropriate section on the next page for your option loading instructions.
Instructions for the fork positions are provided in appendix A.
NOTE:
Before loading bale the pusher must be at the front of the carrier deck.
CONTROL
HANDLE