Filter
Top Products
P. 6 User Guide
Time start menu:
This feature is used to remote start the car at a pre-programmed time. Once the pre-programmed
time is reached, the remote will send a start command to the car module.
Secure Remote feature:
This feature is used to lock the keypad of the transmitter to avoid accidental button press. When
the remote is locked and a button is pressed, the LCD will display “PRESF” for 1 second and goes
back to the clock.
The transmitter keypad can also be locked as follows:
• Press to go to Menu
• Within 3 seconds, press
Press
for about 1sec, to unlock the transmitter keypad.
LCD ON menu:
If there is no activity within the programmed time, LCD will turn off. This feature maximizes the
lifetime of the battery.
Clock Menu:
The Clock menu is used to set the current time on your remote control.
Side button Menu:
The side button can be programmed as on of the following buttons:
• Panic button;
• Stop button;
• Temperature request button;
• Aux 2 output button;
• or CWM.
F Button Function Menu:
The order of LEVELS and MENU can be re-arranged using the F Button Function Menu.
Button Operation:
Button LCD Sounder
Lock button Lock icon + LOCK 1 beep
Unlock button Unlock icon + ULOCK 2 beeps
Trunk button TRUNK text for 1s 1 beep
Start button START text for 1s 1 beep
Engine running
Run time +
icon + Blue backlight for 3s
3 beeps
Engine stop Red backlight on for 3s 2 beeps
Unlock+Start button Valet icon if pressed more than 3s 1 beep
Lock+Unlock button 1 beep
Trunk+Lock button
(2nd car operation)
Lock icon + LOCK 1 beep
Trunk+Unlock button
(2nd car operation)
Unlock icon + ULOCK 2 beeps
Trunk+Start button
(2nd car operation)
START text for 1s 1 beep
L --01 → Lock button
1 beep
L --01 → Unlock button
1 beep
L --01 → Trunk button
Temperature
L --01 → Start button
(pressed more than 3s)
CWM or MTF text for 1s 1 beep
L --02 → Lock button
(2
nd
car unlock)
LOCK and Lock icon 1 beep