Filter
Top Products
User Guide P. 3
Using the Transmitter
Your remote starter is equipped with a 5-button multi-channel remote control. It can operate two
independent vehicles equipped with identical remote starters (see Multi-car operation section on
page 15).
LCD Remote Functions
The transmitter offers several command-confirmation and timer features. This section explains
some of the key functions available. The next section gives a summary of the button combinations
used to access the functions.
Note: If you wish to exit a function while still in the process of accessing it, simply stop and wait
at least 5 seconds: the transmitter will return to its normal state.
The functions of the transmitter are as follows:
F button Functionality:
(By default)
button
Press
Less than 3 seconds
LCD display Press
more than 3 seconds
1x Level 1 L – 01 Enables backlight
2x Level 2 L – 02 Enables backlight
3x Level 3 L – 03 Enables backlight
4x Enters programming mode MENU Enables backlight
Note: The order of LEVELS and MENU can be re-arranged in the menu option FBPRO.
Backlight:
Press and hold
button (for more than 3 seconds and less than 5 seconds), to turn the Backlight
ON for 3 seconds. If button is pressed down for more than 5 seconds, the backlight will stay ON
until
button is released. A quick way to access the backlight is to press the button quickly
(for less than 1second) and the backlight will turn on 3 seconds.
START/STOP Button:
. Starts or Stops the engine
(Normal functions)
UNLOCK Button:
Unlocks all Doors and
disarms the Starter Kill
Function Button (F):
. Turns On the backlight
. For accessing Multi-level functions and Menu
LOCK Button:
Locks all Doors and
arms the Starter Kill
TRUNK Button:
Activates the Trunk
output (AUX 3)
AUX (if programmed):
• AUX 2 output
• Stop
• Temperature request
• Panic
• CWM