P.18 Installation Guide AS-1535 SH
x With the Parking Lights on, immediately push the Pin-switch 3 times.
x The Parking Lights and L.E.D. will flash the five events stored in memory.
Table 12
The first four playback codes are Start Failure Events. There is a pause after each event
code is played back.
The system will play back the most recent event first, then the second most-recent, and so
on. If there are no events at all to report, the Parking Lights will give one long flash.
Start Failure Codes via Parking Lights
1 x = No Start
3 x = Hardware Reset
4 x = Brakes
5 x = No Tach cut-off
6 x = Hood
7 x = Engine Running, no Ignition
detected, or Tach before Start