AS-1535 SH Installation Guide P.13
OPTION 2* Disabled
OPTION 3 Disabled
MODE 3 *indicates default setting
FUNCTION 1 – Home Valet Mode
OPTION 1 Home Valet ENABLED
OPTION 2* Home Valet DISABLED
OPTION 3 Home Valet DISABLED
FUNCTION 2 – AUX 3 / Zone 3 output
OPTION 1 Trunk output when TRUNK button pressed for 3-sec while Ignition is OFF
OPTION 2* Constant while TRUNK button is pressed
OPTION 3 Trunk output with Disarm / Rearm pulses.
FUNCTION 3 – AUX 2 output
OPTION 1 Constant while pressed
(LOCK & UNLOCK pressed simultaneously, or START in Safe Start Mode.)
OPTION 2* Toggle ON / OFF with timeout up to 30 seconds
OPTION 3 Toggle ON / toggle OFF with timeout up to 60 seconds
OPTION 4 Priority Door Access
FUNCTION 4 – AUX 1 output
OPTION 1 Horn Confirmation on second press of the LOCK button
OPTION 2* Priority Door Access
OPTION 3 Horn Confirmation on first press of the LOCK button
FUNCTION 5 – External Trigger Sense
OPTION 1 Zone 3 (Trunk pin) rearm (sends a Disarm pulse before Trunk opening and
rearms 4 sec. after the Trunk is closed)
OPTION 2* Engine START / STOP
OPTION 3 Key Sense
OPTION 4 Smart Ignition Lock
Horn Honk Timing (Optional)
1. Make sure that Mode 3 Function 4 Option1 or Option 3 is activated.
2. FLASH the Hood Pin Switch
Before the 20 seconds have passed,
3. Press and hold the Brake Pedal.
x Press the START and UNLOCK buttons simultaneously on the Transmitter.
x The Horn will Honk 5 times.
4. Release the Brake Pedal.
5. To change the timing:
a. To increase the Horn Honk by 3 ms, press the LOCK button.
b. To increase the Pulse by 10 ms, press the START
c. To decrease the Pulse by 3 ms, press the UNLOCK button.
d. To decrease the Pulse by 10 ms, press the TRUNK button.
6. To save the setting: press LOCK and UNLOCK. If 3 Honks are heard the new value has
been saved.
For each timing change, the Horn will Honk with the new settings, except under the
following circumstances:
x When the lower limit of 5 ms is reached, the Horn will sound for 1/4 second.
x When the upper limit of 200 ms is reached, the Horn will sound for 3/4 second.
A system reset will set the system back to the default: 30 ms