Filter
Top Products
30 © 1999 Directed Electronics, Inc. Vista, CA
■ Other features can be programmed.
■ The Learn Routine can be exited if programming is complete.
Press and release the Valet
®
/Program button the number of times necessary to advance from the feature you just
programmed to the next one you want to program. Then press the Valet
®
/Program button once more and hold it.
For example, if you just programmed the third feature and you would like to program the seventh feature in the
menu, you would: Press and release the Valet
®
/Program button four times. Then press the Valet
®
/Program button
once more and hold it. The siren would chirp seven times to confirm access to the seventh feature.
The learn routine will be exited if any of the following occurs:
1. Close the open door.
2. Turn the ignition on.
3. No activity for longer than 15 seconds.
4. Press the Valet
®
/program button too many times.
system features menu
FEATURE NUMBER ONE-CHIRP SETTING (DEFAULT) TWO-CHIRP SETTING
1 Active arming Passive Arming
2 Audible arm/disarm confirmation on Audible arm/disarm confirmation off
3 Ignition-controlled locking on Ignition-controlled locking off
4 Ignition-controlled unlocking on Ignition-controlled unlocking off
5 Active locking Passive locking
6 0.8 second door lock pulses 3.5 second door lock pulses
7 Single unlock pulse Double unlock pulse
8 Door trigger error chirp on Door trigger error chirp off
9 Ignition-controlled domelight on Ignition-controlled domelight off
10 Valet switch input: 1 pulse Valet switch input: 2-5 pulses
11 Channel 3: validity Channel 3: latched/latched, reset with
ignition/30-second timed/second
unlock/delayed accessory output
to exit the learn routine
to access another feature
once a feature is programmed