AutoMate Car Security 435 Automobile Alarm User Manual


 
© 1999 Directed Electronics, Inc. Vista, CA 29
system features learn routine
The System Features Learn Routine dictates how the unit operates. It is possible to access and change any of the
feature settings using the Valet
®
/Program switch. However, this process can be greatly simplified by using the
optional Personal Computer Interface, or DEI
®
Bitwriter
. Any of the settings can be changed and then assigned
to a particular transmitter, up to four, a feature called Owner Recognition. Each time that particular transmitter
is used to disarm the system, the assigned feature settings will be recalled. Owner Recognition is only possible
when programming the unit via the computer interface or DEI
®
Bitwriter
. If programming with the PC interface
or the DEI
®
Bitwriter
, the learn routine can be locked or unlocked. If it is locked no features can be changed.
To enter the System Features Learn Routine:
1. Open a door: The GREEN wire, H1/5, or the VIOLET, H1/7 must be connected.
2. Turn the ignition on, then off: The YELLOW wire, H1/9 must be connected.
3. Select a feature: Press and release the Valet
®
/Program button the number of times corre-
sponding to the step you wish to change. For example, to access the third feature, press
and release three times. Then press the button once more and HOLD it. The siren will chirp
the number of times equal to the step you have accessed.
4. Program the feature: While holding the Valet
®
/Program button, you can toggle the feature
on and off using the remote transmitter. Pressing the arm button will select the one chirp
or default setting. Pressing the button that is assigned to Channel Two (or the disarm only
button on an OEM configuration transmitter, see Transmitter/Receiver Learn Routine section
of this guide), will select the two chirp setting.
NOTE: The Valet
®
pulse count feature (8) and the Channel three timed output (9) have five possi-
ble settings each. Pressing the Channel Two (or disarm only) button will toggle through all the
possible settings.
5. Release the Valet
®
/Program button.