Filter
Top Products
RS1000 OP 1/07
6
While the
icon is
flashing.
Push the button, the alert
alarm time will displayed.
Press button 2 to turn OFF
the alert alarm timer.
D. SELECT THE TRANSCEIVER’S BUTTON CONFIGURATION:
1. Spin the jog shuttle up
Switch to select the transceiver button configuration. The OLED screen will
display the transceivers button configuration you would like to select.
2. Within 5 seconds, press buttons 1, 2, 3 or 4 to select the remote controls “button configuration”.
Note: If 5 seconds of inactivity expired, or the
button is pressed, the transceiver button configuration
mode will exit.
Spin up the switch
to page 1.
Spin up the switch
to page 2.
Spin up the switch
to page 3.
Spin up the switch
to page 4.
Spin up the switch
to page 5.
Spin up the switch
to page 6.
Spin up the switch to
return to the main page.
E. SELECT THE TRANSCEIVER FEATURES:
1. Spin the jog shuttle down
Switch to select the transceiver feature you need and the OLED screen
will display the features you have selected.
2. Press buttons 1, 2, 3 or 4 once within 3 seconds after making a selection and the OLED screen will
change to the alternative display.
Note: If 5 seconds of inactivity expires or if the
button is pressed, the transceiver features program
mode will exit.
Spin down the switch
to page 1.
Spin down the switch
to page 2.
Spin down the switch
to page 3.
Spin down the switch
to page 4.
Spin down the switch
to page 5.
Spin down the switch
to page 6.
Spin down the switch
to return to the main
page.