Audiovox NPD5500 GPS Receiver User Manual


 
Trip computer
You can call up the computer by selecting the function ”Trip computer”
from the Start menu. The integrated on-board computer shows the
following information:
Speed: Current speed
Average speed: Average speed (since last reset)
Elapsed distance: Route distance (since last reset)
Elapsed time: Travel time (since last reset)
Speed warning at: Speed warning (on/off) and warning limit
(adjustable)
The display of the speed is only informational. The actual speed should
be determined from the vehicle’s speedometer only. Use the function
”Reset” to set the data for route distance, time traveled and average
speed back to ”0”.
Speed warning
When speed warning is activated and the set speed limit is exceeded,
there will be an acoustic warning (beep) and a warning message on the
display. To set the speed limit:
u
Move the cursor to the field with the speed setting and press OK.
u
Use the cursor keys  to set the warning threshold, then
press OK.
u
To turn it on or off, select ”Warning on/off”, press the OK button.
The current status (on/off) is indicated by the color of the square in front
of the speed value (red: off / green: on). Each time the OK button is
pressed, the speed warning is toggled on or off.
t
The speed warning can be used to set the maximum speed when winter
tires are in use.
34
USEFUL EXTRAS