Audiovox NPD5500 GPS Receiver User Manual


 
RC 5000
MAP - Changing guidance screen displays or switching between menus
and guidance displays.
MENU - Calling up the start menu.
Setting the volume of voice messages. Volume setting.
Cursor keys as well as OK confirmation key.
ALT-R - Planning an alternate route
REP - Request current guidance advice
Stand-by
You can switch the system into stand-by from the start menu. Select Stand-by
and press OK. The screen is turned off, the navigation voice messages will
continue. If you wish to first stop navigation, press the OK key on one of the
navigation screens. Select ”Stop guidance” and press OK.
Inserting/changing the map DVD/CD
u
If the blue power LED is illuminated, press the eject key on the
navigation computer once (with the ignition on).
u
If the power LED does not illuminate, press the eject key twice.
The system ejects the DVD/CD.
u
Remove the DVD/CD and insert the new map DVD/CD carefully,
printed side up, until it is pulled in. After exchanging map
DVDs/CDs, the system requires several seconds to initialize.
11
GENERAL INFORMATION
English