Audiovox NPD5500 GPS Receiver User Manual


 
u
Select ”Return” and press OK.
If the rear view camera is correctly connected and the setting ”Rear view
camera connected” is selected, the image from the rear view camera is
automatically displayed when the transmission is shifted into reverse.
Volume
The following options may be selected in the ”Volume” menu.
SDVC: To select a value for the speed-dependent volume increase. Find
the SDVC value best suited for your vehicle by experimenting.
Volume
Audible info. On or OFF switches the volume off and on.
u
In the ”Settings” menu, select ”Volume”. Press OK.
u
Select the function to be set and press OK.
u
Select the desired value or the function to be set and press OK.
The ”Volume” is set using cursor keys and on the remote
control and pressing OK.
u
Pressing OK at Audible info On or OFF will toggle between on
and off.
u
Select “Return” and press OK to confirm the selections.
System information
The ”System information” menu offers the following functions:
”Diagnosis”: For diagnosing hardware and software problems
(code-protected – only for authorized service personnel).
”Default settings”: Resetting the parameters of the ”Settings” menu to
the factory presets (see the next paragraph).
”Configuration”: Software and hardware data for service purposes.
Speed correction: for setting the average speed used as the base for
calculating the estimated time of arrival and the remaining travel time.
u
In the ”Settings” menu, select ”System information”. Press OK.
u
Select ”Speed correction” and press OK.
u
Press cursor keys and to correct the speed and press OK.
u
Select “Return” and press OK to confirm the settings.
20
GENERAL INFORMATION