Filter
Top Products
60-EN
Auxiliary (AUX) Setting
[Auxiliary (AUX)] is selected on the Source setup menu in step 3. Refer
to “Source Setup Operation” (page 55).
Setting item: AUX 1 In
Setting contents: Off / On (Initial setting)
When AUX 1 In is set to “ON”, this setting is available.
Setting item: Primary Name
Setting contents: AUX 1 (Initial setting) / DVD / GAME / EXT.DVD /
DVD-CHG / DVB-T / TV
• When a DVB-T tuner is connected, you can use it to connect one
more External Input device. Setting the Secondary name can change
the mode name display of this device.
Setting the Secondary Auxiliary (AUX) Name
Secondary name can be set only when Primary name is set to “DVB-T”.
Setting item: Secondary Name
Setting contents: OFF (Initial setting) / AUX 2 / DVD / GAME /
EXT.DVD / DVD-CHG / DVB-T* / TV
• The selected source name is displayed instead of Auxiliary (AUX)
mode name.
* If the Primary Name is DVB-T, DVB-T is not displayed as a
Secondary Name option.
Switching the Visual Input Signal System
After setting to “On” in “Setting the Auxiliary (AUX) Mode”, this
setting can be carried out. The video input type can be changed.
Setting item: Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
Connection with external input devices is available through the iPod
VIDEO connector. An optional adapter cable is required (standard RCA
to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug).
You can also play back video connecting with an optional AV cable
(4-pole mini AV plug to 3-RCA).
Setting item: AUX 3 Source Select
Setting contents: iPod Video (Initial setting) / AUX 3
Usable 4-pole mini AV plug
The unit accepts the following 4-pole mini AV plug pin-out:
• Please check pin-out carefully before use of this product. Depending
on the cable, there may be no picture and/or sound.
• When an iPod video is selected or the current source is AUX3, this
setting cannot be adjusted.
After setting to “AUX 3” in “Setting the AUX 3 Source Select”, this
setting can be carried out. The video input type can be changed.
Setting item: AUX 3 Signal
Setting contents: Auto (Initial setting) / NTSC/PAL
• When the current source is AUX 3, this setting cannot be adjusted.
Rear Seat Entertainment (RSE) Setting
[Rear Seat Entertainment (RSE)] is selected on the Source setup
menu in step 3. Refer to “Source Setup Operation” (page 55).
Video and audio can be output to the rear monitor.
Setting item: Rear Seat Entertainment (RSE)
Setting contents: Off (Initial setting) / On
• If you selected the “On” setting, set the “Remote Sensor Setting”
(page 44).
Setting the Auxiliary (AUX) Mode
Off: AUX source is not displayed.
On: AUX source is displayed.
Setting the Primary Auxiliary (AUX) Name
(AUX 1 Setup)
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.
Setting the AUX3
iPod Video: Set when connected to an iPod or iPhone.
AUX 3: Set when connected to an external input device.
Setting the AUX 3 Source Select (Switching
the Visual Input Signal System)
Auto: The video input signal type (NTSC or PAL) will
be automatically selected.
NTSC/PAL: Choose the video input signal type manually.
Setting the Rear Seat Entertainment
System
Audio L (White)
Audio R (Red)
Ground
Video (Yellow)