Alpine X008U / INE-W957HD GPS Receiver User Manual


 
37-EN
Display example for DVD Video main screen
Display example for DivX
®
main screen
Information display-1
DVD-Video:
Title name/Chapter No.
DivX
®
:
File name/File No./Current File No./Total File No. in Current
Folder
Information display-2
DVD-Video:
Audio signal output/Subtitle/Angle
DivX
®
:
Audio signal output/Subtitle
Total time for playing
Elapsed time
Disc types that can be used for each heading are
represented by the following marks.
The DVD operation screen display
Touch the screen while the DVD playback screen is
displayed.
The DVD operation screen is displayed.
The operation screen changes to the visual screen in the DVD mode
for 5 seconds after an operation has been performed.
If you try to activate the DVD while driving, the display will show the
warning-Picture off for your safety.
Some operations cannot be carried out depending on the disc or
playback screen.
Playing a Disc
DVD
Touch [<<], [>>]
Touch [<<], [>>]
DVD Commercial Video discs (used for the
distribution of movies, etc.) or a DVD-R/DVD-
RW, DVD+R/DVD+RW recorded in a video
mode can be used.
CD-R/CD-RW/DVD-R/DVD-RW/DVD+R/
DVD+RW discs that are recorded in the
DivX
®
mode can be used.
WARNING
It is dangerous for the driver to watch the DVD/TV/
Video while driving the vehicle. The driver may be
distracted from looking ahead and an accident could
occur.
Install the X008U/INE-W957HD correctly so that the
driver cannot watch DVD/TV/Video unless the vehicle
is stopped and the emergency brake is applied.
If the X008U/INE-W957HD is not installed correctly,
the driver will be able to watch the DVD/TV/Video
while driving the vehicle and may be distracted from
looking ahead causing an accident. The driver or
other people could be severely injured.
Caution
Not all functions will operate for every DVD. See the
individual DVD’s instructions for details on the
features supported.
Fingerprints on a disc may adversely affect
playback. If a problem occurs, remove the disc and
check for fingerprints on the playback side. Clean
the disc if necessary.
If you switch the power or Ignition key OFF or
change sources during playback, playback will
continue where you left off when you resume
playback.
If you try to perform an invalid operation (based on
the type of disc being played), the following mark is
displayed on the monitor screen: