Filter
Top Products
Edit your road preferences
Once you have saved a Routing profi le you can set
your road preferences. Scroll to the bottom of the page
and select View/Edit Road Preferences.
The available settings are:
• For eac
h road type: Choose whether you want
CoPilot to Strongly Avoid, Avoid, Neutral, Favor
or Strongly Favor when choosing a route.
• Speed:
Select an appropriate speed for each
road, you can increase or decrease the speed
in increments of 5.
Note: Please note, it is not recommended to change the default route and road
preferences in CoPilot as this will affect the route calculated and ETA shown.
Advanced
42
04
Adjusting your Safety View
• Tap Menu > More > Settings > More > Driver Safety. From here you
can alter the settings of the Safety View in the following ways:
• Display Map Near
Turns: Decide whether to show a 2D/3D zoomed map
on the approach to each turn or always show the Driver Safety screen.
Select Yes to display the map or No not to.
•
When the Turn is Within: If you selected Yes above, choose the distance
before the turn at which you would like the map to be displayed. The
distance can be set between 0.3 miles and 1 mile.
• Map T
ype: If Display Map Near Turns is set to Yes, select whether
to use a 2D or 3D map when approaching turns.
User Guide 04 Advanced