Filter
Top Products
April 1, 2006 8 Lit. No. B64090, Rev. 00
UNPACKING & INSPECTION
Your BLIZZARD
®
straight blade has been packaged to
withstand transit and weather related damage. Fully
inspect all components upon receipt of your plow. In
the event of shipping damage or missing parts,
immediately contact our Customer Service
Department at 1-888-680-8600.
Begin unpacking and inspection in the following order:
1. Remove the shipping document from the end
panel of the pallet wrap. Retain all documentation
for your records.
2. All wood framing and polyethylene material should
be removed from the pallet for easy access to the
snowplow.
3. Due to the odd shaped components and size of
several assembly parts, various cable ties and
corrugated material are used for scratch
resistance and package orientation. Please
remove these items prior to assembly.
4. Place the main blade assembly on a flat, level
surface.
Once you have inspected all parts and removed all
packaging materials, your snowplow is ready to be
fully assembled.
Retain this information for your records.
Date of Purchase: ___________________________
Dealer/Distributor: __________________________
Dealer Phone Number: _______________________
Snowplow Serial Number: ____________________
Hydraulic Pump Serial Number: _______________
Serial Number Labels
The serial number label on the back of the blade
(driver side) contains important information about the
snowplow. The serial number is displayed directly
above the bar code, and the model information is
above the serial number. The first six digits in the
serial number represent the manufacture date of the
snowplow. This date is formatted "yymmdd", in the
example below, the manufacture date would be
February 16, 2006. A similar label can also be found
on the hydraulic unit. The manufacture date is, again,
the first six digits of the serial number. Be sure to note
both serial numbers in the area at the bottom of the
preceding column.
Blizzard Model 800 HD
060216650000B0800
Serial
Number
Model