AB Soft 760HD Offroad Vehicle User Manual


 
April 1, 2006 48 Lit. No. B64090, Rev. 00
HARNESSES, ACCESSORIES & KITS – ALL MODELS
Ballast
Retainer
14. Ballast (additional weight) is an important part of
qualifying vehicles for snowplow eligibility. Rear
ballast must be used when necessary to remain in
compliance with axle ratings and ratios as
specified by the vehicle manufacturer. If ballast is
required, it is important that it be secured properly
behind the rear axle. A ballast retainer kit is
available.
NOTE: The ballast retainer kit is for snowplow
vehicles requiring ballast. See your sales outlet for
the correct amount of ballast required. Include the
weight of the retainer as part of the ballast
requirement. Sand bags are recommended for use
as ballast.
12. This adjustable bracket mounts easily to your
straight blade joystick control and installs quickly
onto any door panel. Ideal for left-hand joystick
operation or for vehicles with center consoles. The
window mount bracket is shipped complete with
hardware. Some assembly required.
13. Putting your snowplow away for the winter? Have
a deep scratch to cover? Clean up your blade and
plow parts with our gloss spray paints. BLIZZARD
touch-up paint provides an excellent finish to help
keep your snowplow looking its best. Paint
provided in 12 oz. spray cans.