VerteX RTH Series H.8 and H.16 Series
38
screen mode, however, only those channels that can be viewed may be selected.
For the remaining backup procedures, see {4-13-5 Common Backup Procedure}.
5-13-5. Common Backup Procedure
[Figure 4-25. Backup Window]
[Figure 4-25] shows the initial backup window menus.
A list of devices that can be selected as well as simple information on the currently selected devices are
outputted.
Selecting a device by pressing the Select button causes the free space and total capacity for the selected
device to be displayed.
Selecting a device causes the directory name based on the initial values for the time and channel to be
displayed and the size of the file to be backed up to be calculated.
The directory name is set up using the backup time. The first 12 digits are determined by the
year/month/date/hour/minute/second for From, and the 12 digits in the middle, by the
year/month/date/hour/minute/second for To. The last 2 digits are determined by the number of folders in
the selected device.
If a device is not selected, the backup time and channel cannot be changed.
Selecting a device enables selecting the backup time as well. As a rule, the From time cannot be later than
the To time, and the To time cannot be earlier than the From time.
Selecting the item to be changed for the year/month/date/hour/minute/second and pressing the [Select]
button will cause the values that can be set up to be displayed in the Scroll Box. If no channel has been
selected, however, the time cannot be changed either.
The time displayed at this time means that there is data at the corresponding time. If
there is no data, however, the time is not included in the Scroll Box.
Changing the backup time causes the name of the directory to be backed up to be changed as well.
To select the backup time, channel, or media, select {Menu} Æ {Channel}, {Menu} Æ {Time}, {Menu} Æ
{Media}.
The channel to be backed up can only be selected if there is data within the selected
time.
If the file to be backed up exceeds the free space, its size is displayed in a yellow box in case the selected
device is capable of rerecording and in a red box if not.
