Vertex Standard H.16 Manual

A SERVICE OF

next previous

VerteX RTH Series H.8 and H.16 Series

12

2-3. Installation and Connection

[Figure 2-1. VERTEX RTH-16 Basic Connection and Device Connection]

[Figure 2-2. H.16 Basic Connection and Device Connection]

2-3-1. Basic Connection

By referring to above [Figure 2-1. VERTEX RTH-16 Basic Connection and Device Connection] and [Figure 2-2.

H.16 Basic Connection and Device Connection], Connect the CCTV camera, CCTV monitor (or VGA monitor),

and USB mouse to the DVR and set up CONFIG SWITCH.

Connected Device DVR Terminal

1

CCTV camera Rear Video Input

2

CCTV monitor Rear TV

3

VGA Monitor / LCD Monitor Rear VGA-OUT

4

Mouse

VERTEX RTH-Series: Front USB / H.8 AND H.16-Series : Right

Side USB

5

CONFIG SWITCH Rear NTSC/PAL or VGA/TV Setup

Refer to a further description of CONFIG SWITCH below.