VerteX RTH Series H.8 and H.16 Series
29
On the real-time monitoring screen, select {Menu} Æ {Miscellaneous} Æ {Camera/TV Setting}
Æ{Camera Adjustment}.
Select a camera to be adjusted.
Adjust the position of the selected camera using the arrow keys.
Adjust the other camera by repeating and
Moving the camera, down, right, or left excessively may cause black or gray areas to appear on
the screen. The level at which such condition does not occur is the proper control range for the
camera.
5-5-5. TV Adjustment
TV Adjustment is to move the TV OUT screen Up/Down/Left/Right.
On the real-time monitoring screen, select {Menu} Æ{Miscellaneous}Æ {Camera/TV Setting} Æ {TV
OUT Adjustment}.
Adjust the CCTV monitor screen up/down or Right/Left using the arrow keys.
Moving the monitor up, down, right, or left excessively may cause black or gray areas to appear on the
screen. The level at which such condition does not occur is the proper control range for the monitor.
5-5-6. Camera Title Shown/Hidden
On the real-time monitoring screen, select {Menu} Æ {Miscellaneous} Æ {Display Setting} Æ {Camera
Title}.
Select the On/Off status using the arrow keys and the Select button.
5-5-7. Screen Border Adjustment
On the real-time monitoring screen, select {Menu} Æ {Miscellaneous} Æ {Display Setting} Æ {Border}.
Select the desired item using the arrow keys and the Select button.
After assigning the setup value per field, press the [ESC] button to exit the Border Line setup mode.
[Figure 4-13. Screen Setup Window]
Border setting fields
Field Setup Value Description
On
Display the border for each channel screen in
varying modes.
Mode
setup
Off
Hide the border for each channel screen in
varying modes.
Internal Hide the external border line.
Type
All Display all border lines.
Width
2, 4 Set the width of the border.
Color
Black, White, Red, Green, Blue Set the color of the border.
