A SERVICE OF

logo

Open as PDF
next previous
12
Figure 2
Service Hoses
Connected to
Storage Ports
Setup
Language Selection
Theoperatorselectsthelanguageforthescreen
promptdisplays.Englishisthedefaultlanguage.
1.UsetheUPorDOWNarrowkeytotogglethrough
theavailablelanguages.
2.PressOKtosettheselectedlanguage.
3.Thelicenseagreementisdisplayedforyour
approval,afterwhichthemachinecontinueswith
SETUP
mode.
Unit of Measure
Theoperatorsetsthedisplayforunitsofmeasure.
Metricisthedefault.
1.UsetheUPorDOWNarrowkeytotoggleMetricor
Englishunits.
2.
PressOK tochoosethedisplayedunitofmeasure.
Date and Time Setup
Themachineisprogrammedatthefactoryforthelocal
timezone,usinga24-hr.clock,anddate.
1.UsetheLEFTandRIGHTarrowkeystomodifythe
minutesdisplayed.
2.UsetheUPandDOWNarrowkeystomodifythe
hourdisplayed.
Note: The date changes only by scrolling through an
entire day.
3.PressOK toacceptthedateandtime.
Service Installation Clearing
Atthispointthemachineclearsitsinternalplumbing
beforeproceedingwithsetup.
1.Whenprompted,connecttheservicehosesfromthe
machinetotheirstorageportsasshowninFigure2.
2.Checkthevacuumpumpoillevelsightglassand
verifytheoilleveliscorrect.
3.Opentheservicecouplers.
Themachineperformsaninternalclearingofits
plumbing,andthensoundsanalarmwhentheTank
FillAdjustmentscreenisdisplayed.